Electrical engineering courses

POWER CABLES CHARACTERISTICS & APPLICATIONS

Ref No: 2015057

INTRODUCTION 
  
The electricity companies have to supply electricity to the consumers at the lowest possible cost commensurate with safety. Power cables represent a major capital asset for electricity suppliers. While in service power cables must be maintained and monitored in order to anticipate faults and possibly avert any failure. 
While requirement for underground cables have been increasing, there has been a rapid development of new cable types and accessories including the use of polymeric cables (predominantly XLPE). Evaluating technical and economic aspects of new cable systems is not easy. Furthermore the installation of underground power requires unique skills and knowledge. Tasks involved cover many aspects: laying, jointing, testing and commissioning underground cables, to cable location and fault-finding. Changes in systems also bring additional costs in stores holdings, job instruction preparation and jointer training. 
Faults in underground cables can occur at any time, and the causes are many and varied. When faults do occur they generally cause loss of supply to customers and loss of revenue for suppliers. So it is imperative that the fault location process is efficient and accurate to minimize excavation time, which results in reducing the inconvenience to all concerned. For fault locating to be efficient and accurate technical staff needs to have expert knowledge accompanied with experience in order to attained service reliability.   
This course is designed to ensure that those responsible for the selection, laying, operation, maintenance and monitoring of power cables understand the characteristics, technical issues involved and comply with relevant specifications and requirements. 

  
OBJECTIVES 
  
This hands-on course covers types of power cables, characteristics, construction, applications, operation and maintenance. This course provides the fundamentals, a summary of present operating practice and of new technology. Participants can use the skills and knowledge gained in this course to perform testing and preventative maintenance on power cables to ensure safety and longer equipment life. 

After the course, participants will be able to: 
-Understand the essential characteristics and requirements of underground cables 
-Appreciate the technical options for selection, laying and operation of power cables 
-Carry out jointing and termination of high voltage underground cables 
-Apply practices for fault detection and location and for power cables 
-Identify problems and failure modes of power cables 
-Perform routine and preventative maintenance, monitoring and testing of power cables 
 
Your participation will help you understand the theory and practice of power cable and accessory engineering and applications, with particular emphasis on: 
-Cable materials: conductors, insulations, shields, and jackets 
-How cable is designed and manufactured 
-Cable characteristics, applications, selection, and specification 
-Cable ampacity ratings and calculations 
-Splicing and terminating standards and practices

CHAPTER 1: HAZARDS OF ELECTRICITY
1- HISTORY
2-IMPORTANCE OF GROUNDING 
3- GROUNDING CLASSIFICATION
4- EARTH, GROUND AND NEUTRAL
5- DEFINITIONS
6- CONDITIONS OF DANGER
7- HAZARD ANALYSIS
8- ELECTRIC SHOCK
9- AFFECTED BODY PARTS
10- WHY EARTHING?
11- GROUND FAULT INTERRUPTING METHODS
12- ELECTRICAL SAFETY MODEL
13- IP PROTECTION

CHAPTER 2: CABLE CONSTRUCTION AND MATERIALS
1- General
2- Conductor materials
3- Plastics
4- Rubbers
5- Thermoplastic elastomers (TPE)
6- Other thermoplastics
7- Low-smoke materials
8- Safety rules and standards
9- Product descriptions
10- Cable dimensioning
11- Economic cross-section and loss evaluation
12- Hints on cable laying
13- Single core cables


CHAPTER 3: CABLE ELECTRICAL CHARACTERISTICS
1- Introduction
2- Design features
3- Manufacturing processes and materials
4- Conductor resistance
5- Inductive reactance 
6- Capacitive reactance 
7- Dielectric losses 
8- Insulation resistance 
9- Dielectric strength (electric breakdown strength)  
10- Impulse strength 
11- Cable rated voltage 

CHAPTER 4: POWER CABLES
1- Introduction
2- Types of cables
3- Low-tension cables
4- High-tension cables
5- Tension cable

CHAPTER 5: CABLE AMPACITY
1- Introduction
2- Air cable ampacity
3- Underground cable ampacity
4- Cables installed in ducts
5- Short circuit
6- Short circuit effect on cables
7- Thermal stress
8- Electromechanical stress
9- Permitted voltage drop 

CHAPTER 6: CABLE CONDUITS, DUCTS, TRUNKING, TRAYS, TRENCHES, JOINTING & SERVICE ENTRANCE

1- Introduction
2- General
3- Low voltage joints
4- Medium voltage
5- Joints over 30 kV
6- Open terminations
7- Resistive stress control
8- Cable termination design
9- Enclosed terminations
10- Crimp connection
11- Pulling the cable
12- Installing cable racks
13- Cable jacket and sheath removal
14- Cable metallic shielding removal
15- Cable semi-conducting material removal
16- Cable insulation removal
17- Cable splice connector
18- Installing taped cable insulation
19- Identification of conductors
20- Conduits
21- Cable supports
22- Trunking
23- Cable tray
24- Trenches
25- Service entrance

CHAPTER 7: CABLE TESTS AND CABLE FAULT LOCATION
1- Inspection, tests & evaluations
2- Cable testing
3- Cable fault causes
4- Types of fault
5- Steps for fault location
6- Fault location methods
7- A-frame
8- Time domain reflectometry
9- Wheatstone (resistance) bridge
10- Capacitance bridge


This course is designed for engineers and senior technicians who are responsible for the design, manufacture, specification, inspection, installation, and/or operation of insulated cables and accessories, including Industrial, utility, or plant electrical engineers, Senior installation or testing technicians, Consulting engineers, Electric utility engineers involved in distribution engineering, operations, planning, or reliability engineering, Standards engineers and technicians, Substation design engineers, Transmission and distribution line design engineers  
Participants need no specific requirements other than basic understanding of electricity and magnetism and knowledge of nature and operation of power supply and of underground distribution systems. 

Trainees shall receive a portfolio containing a comprehensive course manual.

Attendees shall receive a certificate of attendance from AMAD Tech.